MAXIMA 9B

The MAXIMA 9B machine was designed for the most productive and effective cost solution for the increasingly demanding market for bar- or chuck-fed turned components, with one single setup. Production of simple or complex components is straightforward with the MAXIMA 9B's multi-tool and multi-tasking capabilities.

These machines provide a combination of two upper slides with tool combs and a lower slide turret system. The tool combs provide extremely fast tool changes, while the Y axis provides a wide range of simultaneous turning and milling operations on both the main spindle and sub-spindle.

The MAXIMA 9B machine's axis configuration allows for "superimposition" operations.

The upper slide incorporates a B axis (rotation axis around the Y axis). This allows the cutting tool to tilt and rotate, facilitating machining of inclined and complex surfaces.

Our MAXIMA range is a safe choice for your production facilities. Its multi-tool and multi-tasking capabilities allow it to handle production of complex components

IMAGE GALLERY

VIDEOS

AXIS CONFIGURATION

B-AXIS LEFT-HAND UPPER SLIDE

Has X-1, Z-1, Y-1 and B axes, with 3 rows of tools, for a total of 15 tool positions, 9 of which are driven.

Face 1: 5 positions, 3 for driven or fixed tools and another 2 for solely fixed tools. Fixed tools can be internal or external.
Face 2: 5 positions, 3 for driven or fixed tools and another 2 for solely fixed tools. Fixed tools can be internal or external.
Face 3: 5 positions, 3 for driven or fixed tools and another 2 for solely fixed tools. Fixed tools can be internal or external.

RIGHT-HAND UPPER SLIDE

It has two X-3 and Y-3 axes, as well as 11 tool positions, 5 fixed internal or external tools and up to 6 fixed (or optional driven) tools to work with the sub-spindle (Z-3 axis for sub-spindle slide).

LOWER TURRET SLIDE

Provides for up to 24 tools (12 for main spindle and 12 for sub-spindle), X-2 and Z-2 movement axes, on a turret with one single motor for tool changing and transmission to driven tools. Tools can be fixed interior/exterior or axial/radial driven.

3 TOOLS CUTTING SIMULTANEOUSLY, USING "SUPERIMPOSITION" CONTROL

The "superimposition" feature of the control provides for simultaneously cutting with 3 tools to improve production cycles. With both the turret and the tool comb working on the main spindle, the turret can also work on the sub-spindle.

CNC SYSTEM

Mitsubishi M800V nano CNC control system, extremely fast and powerful control with 19" touchscreen.
Part programme test.

With the manual pulse generator, both the upper slide and the sub-spindle can be moved forward and backward with the programme. This feature considerably reduces machine fine-tuning times.

Additional standard control features:

USB connection to PC.
Electronic collision detection system.
Automatic shut-down system.
Tool load display.
"Tool life" management.
Connection to peripheral devices and equipment with a range of fieldbus networks, including CC-Link®, PROFIBUS® DP, and EtherNet/IP™.
Remote connection for maintenance.
Alarm notification system with EMAIL messages.
Custom customer screen integration.

MAXIMA 9B
Spindle
Maximum round bar diameter at spindle	mm	42	52	65
Quick-change collet system for spindle	Fixed position	HAINBUCH 42	HAINBUCH 52	HAINBUCH 65
Main motor
Main spindle motor power ED 100 %(50%)	kW	7.5 (11)	11 (15)
Maximum spindle speed	rpm	6000	5000	4000
Sub-spindle
Maximum round bar diameter at sub-spindle	mm	42	52	65
Sub-spindle through-bore	mm	40	50	50
Quick-change collet system	Fixed position	HAINBUCH 42	HAINBUCH 52	HAINBUCH 65
Spindle sub-spindle motor power ED 100% (50%)	kW	3.7 (5.5)	5.5 (7.5)	7.5 (11)
Maximum speed	rpm	6000	5000	4000
Maximum Z-3 axis travel	mm	750
Maximum Z-3 rapid traverse	m/min	30
Extraction system pressure for coolant blow-off	bar	5
Air-blow tank	L	15
Lower turret
Total number of tool positions	Num.	24
Maximum number of driven tools for spindle/sub-spindle	Num.	12 / 12 Internal or external
Tool clamping system	Type	VDI-30 / BMT-45
Tool bar size	mm	20 x 20
Internal tool holder with diameter	mm	32
Maximum number of driven tools for spindle/sub-spindle	Num.	12 / 12 Axial or radial
Driven tool power	kW	3.7 (5.5)
Maximum driven tool speed	rpm	5000
Maximum X-2 axis travel	mm	190
Maximum X-2 rapid traverse	m/min	20
Maximum Z-2 axis travel	mm	590
Maximum Z-2 rapid traverse	m/min	30
High pressure coolant	bar	13
Upper slide with B-axis
B-axis positioning range	Degrees	270
Total number of tool positions for spindle and sub-spindle	Num.	15 individual
Face 1: Maximum number of individual fixed tools	Num.	5 internal or external
Face 1: Maximum number of driven tools and individual fixed tools	Num.	3 axial – 2 internal or external
Face 2: Maximum number of individual fixed tools	Num.	5 internal or external
Face 2: Maximum number of driven tools and individual fixed tools	Num.	3 axial – 2 internal or external
Face 3: Maximum number of individual fixed tools	Num.	5 internal or external
Face 3: Maximum number of driven tools and individual fixed tools	Num.	3 axial – 2 internal or external
Tool bar size	mm	20 x 20
Internal tool holder with diameter	mm	32
Clamping system for driven tools	Type	ER
Driven tool power	kW	5 (constant) / 8 (peak)
Driven tool torque	Nm	16 (constant) / 26 (peak)
Maximum driven tool speed	rpm	6000
Maximum X-1 axis travel	mm	260
Maximum X-1 rapid traverse	m/min	20
Maximum Y-1 axis travel	mm	360
Maximum Y-1 rapid traverse	m/min	20
Maximum Z-1 axis travel	mm	200
Maximum Z-1 rapid traverse	m/min	30
High pressure coolant	bar	9
Right upper slide
Total number of tool positions (sub-spindle)	Num.	11
Row 1: Maximum number of fixed tools	Num.	5 internal or external
Row 2: Maximum number of fixed or driven tools	Num.	6 individual external
Tool bar size	mm	20 x 20
Internal tool holder with diameter	mm	32
Optional: Clamping system for driven tools	Type	ER
Optional: Clamping system for driven tools	kW	5 (constant) / 8 (peak)
Optional: Driven tool torque	Nm	16 (constant) / 26 (peak)
Optional: Maximum driven tool speed	rpm	6000
Maximum X-3 axis travel	mm	260
Maximum X-3 rapid traverse	m/min	20
Maximum Y-3 axis travel	mm	420
Maximum Y-3 rapid traverse	m/min	20
Maximum Z-3 axis travel (sub-spindle)	mm	750
Maximum Z-3 rapid traverse (sub-spindle)	m/min	30
High pressure coolant	bar	9
Cooling system
Total number of coolant pumps	Num.	4
Pump 1. High pressure coolant supply	bar	13
Pump 2. High pressure coolant supply	bar	9
Pump 3. Work cleaning area	L/min	100
Pump 4. Chip extractor drum filter cleaning	bar	4
Tank capacity	L	380
Power requirements
Machine voltage	V	400 / 3 Phases
Transformer input voltage	V	Optional
Total power requirement	kW	40
Pneumatic supply	bar	5/6
Main dimensions
Floor space (approx.)	mm	4475 x 2375
Total height	mm	2400
Weight (approx.)	kg	9000